Posts Tagged ‘garage door’
Las Vegas Garage Door Repair
Last Updated on Tuesday, 12 October 2010 09:34 Written by Jerry Driver Tuesday, 12 October 2010 09:34
Maintaining an existing garage door will not only keep your home aesthetically pleasing, but is not difficult if fixed when problems occur. Many people believe that working on this feature of the home is too massive a project so do nothing until problems require drastic action. Everyone driving by the property and even homeowners arriving home see the garage door first and any damage can really have an impact on the overall look of the home. Whether it needs a slight repair or a total replacement, experts at the many Las Vegas Garage Door Repair shops are eager to help keep any property looking its best.
Metal doors are much different than wood not only in their composition, but also in how they are repaired. To repair many doors is an easy at-home project since many flaws are superficial. However, since many metal doors contain slatted panels, which reduces repair costs, simply replacing the damaged section can solve the problem. In this case, an expert in the field may need to be consulted since sometimes special tools are required to get panels in and out without damaging those around them.
In attempting to find a panel there are a few options. One can look on the door itself to find the name of the manufacturer and contact them, via the Internet, to find out if the panel is available or to get a reference to dealers in the vicinity from homeowners who have the same model. Another option is to check with recycling and rebuilding places. Sometimes when a property is demolished some parts of the garage are retained and can be purchased from a recycling center.
If damage has been done to the beams of the framing structure, more difficulty may be experienced during repair. If out-of-square in any area not only will the door not open and close correctly, but it may not provide the required seal when close either. Fortunately, the many Las Vegas Garage Door Repair shops have skilled craftsman who can provide assistance when needed.
Most often, a garage door must be painted the same color as the house. Other times it remains the original metal color. If it has been painted, trying to match the color may be difficult. It is suggested that a piece of the damaged part be taken to a paint store where they can usually combine tints to match colors.
Metal doors are painted somewhat differently from wooden ones. They still must be sanded, but the process is a little different. Next, they must be primed, then painted, and finally sealed. Additionally, it’s important to take note of they type of material the door is made from as galvanized metal is treated somewhat differently from more high tech products. Whenever possible, however, finding recycled material will save much in the long-run.
It’s important to remember that the value of the home is generated from its total appearance. Since the garage door is the largest piece on the house it makes a huge statement and can have a significant impact on resale value if not properly maintained. If concerns arrive, or general maintenance is required, it’s always best to contact one of the experts working from las vegas Garage Door Repair shops in the area.
Complete And Comprehensive Guide For Quick Garage Door Opener Installation
Last Updated on Monday, 19 July 2010 07:57 Written by Steven Merrit Monday, 19 July 2010 07:57
It’s often easy to do a garage door opener installation. You can use totally different materials from different brands out there but principally the process is the same. Garage door openers are normally supplied in a DIY kit to be installed by the buyer, so as expected it comes with really clear step-by-step instructions and components that are labeled clearly for easy identification.
It’s a simple and easy method of installing that will not take too much time to complete.
Assemble the Opener. Lay out all parts like the directions indicate. Parts are often stamped or might contain lettered stickers. The first step is to assemble the rail. Then you may attach it to the opener’s motor head. After the opener has been completely assembled, the last step is installing.
Connect the Rail to the Header. To execute this step, you’ll need an eight-foot ladder. Elevate the garage door and then mark it at the highest tip. Close up the garage door. At the location of the mark, measure up two inches. The bottom of the header bracket will be positioned right here, over the middle of the door. Utilize the wood lag bolts to connect the header bracket within the 2nd mark.
With the motor end on the bottom and the rail inside the header bracket, line up the opener assembly on the garage door. You would need to line up the holes on the rail with the header bracket. Put a clevis pin in to the bracket and rail to connect.
Install the Motor. Put the ladder at the back of the garage door tracks, in the midpoint. Lay the motor on the ladder. Gradually, raise the garage door until it comes in contact with the door. The motor assembly will. be raised and lifted from the motor while you proceed to open the garage door. After the door is completely open, put a 2×4 between the opener rail and garage door.
To complete the garage door opener installation right, you will need to connect the hangers to the motor head and into the ceiling stuffs. Using the directions and hangers given, connect them to the ceiling using lag bolts. Now lift up the motor head after attaching the hangers and fasten it to the hangers in the ceiling.
Connect the Opener to the Door and Controls. Close up the garage door. Connect the longer section of the opener arm to the opener carriage assembly. Connect the remaining half to the garage door. Then hold the arms together and adjust them in line with the directions.
At this point you have to check pre-wiring for the wall station in addition to the photo-electric eye. Low-voltage wires under door track, by the entrance from the home, as well as by the opener motor is a sign of this.
You can easily do pre-wiring in case the garage is not yet pre-wired. Instructions are given for this procedure. After wiring is done, fasten the photo-electric eye to the exterior of the garage door entrance. Make use of the insulated staples to attach the wires to the ceiling as well as the walls. Do not forget to leave some cords free to use for the opener.
To find out more about garage door opener installation, you can visit John Defoe’s most comprehensive online guide on garage door installation and other garage door instalation problems to learn how to make your garage door run smoothly and find out where is the best place to get information.